ROTARY SCREW AIR COMPRESSORS
Oil-Flooded- Single-Stage
40-350 HP
186-1521 SCFM
40-210 PSIG
The QNW G Series is a state-of-the-art, single-stage, oil-flooded, rotary screw air compressor assembly. When your production requirements are critical, you need the rugged Quincy Northwest compressor.
Control Panel
The Quincy Northwest graphic operator access terminal is a microprocessor-driven control designed to monitor, regulate and protect the compressor. Sensors continuously transmit temperature and pressure information to the processor. This data allows the most efficient compressor operation, enunciation of proper service intervals and alarms, and initiates shut down on abnormal operating conditions.
Inside the G Series
|
The G Series compressor assembly represents the best of oil-flooded, single-stage, rotary screw technology. All components are manufactured in the U.S.A. The compressors are assembled in our Centralia, Washington plant. Standard assemblies are CSA listed. |
G Series air-end is the heart of the compressor's reliability.
| Triplex bearings The triplex tapered roller bearings are designed to ensure longer life. This superior three bearing arrangement consistently provides longer life than competitive machines. |
Positive lubrication The G Series uses a positive displacement lubricant pump to assure proper lubrication during startup, operation and shutdown. Unloaded BHP is approximately 15% of full load, the lowest in the industry. |
| Shaft seal The G Series primary shaft seal is a triple-lip type design. This design is more reliable than a mechanical seal. |
Slow speed rotors The G Series' male rotor is direct driven and non-geared. It runs at 1800 RPM motor speed, maximizing efficiency and minimizing wear while performing at a low noise level. |
| Warranty The G Series 5-year air end warranty is the best in the industry. |
|
Rogers Machinery
Company, Inc.
Telephone 503.639.0808
Fax 503.639.0111
Home:
www.rogers-machinery.com
E-mail:
Sales@rogers-machinery.com
Last Modified:
August 06, 2008
Copyright© 1998 - 2008 Rogers Machinery Company Inc.
|